E-bike tracking via GPS
Installed within the e-bike motor compartment
Connected to your smartphone via App
Real-time tracting throughout Europe
Motion alarm on your smartphone
Additional integrated battery
Compatible with motors:
Bosch 2nd and 3rd generation
Bosch 4th generation
Bosch Smart System
Additional battery in case the bike will be stored for a long time More
Product code: BT01H-B001-0-365-DEShipping and Payment
BikeTrax GPS Tracker – perfect protection against theft of e-bikes with a Bosch motor. Smarter than a mechanical lock!
How does BikeTrax work?
BikeTrax is a miniature GPS locator that pairs with the PowUnity Bike app. It is installed in the e-bike motor compartment, so it is invisible to thieves. If the e-bike is not in motion, the locator is in sleep mode - it is activated automatically thanks to the motion accelerator. While riding, the locator records the route, and after the trip is over, the locator goes back to sleep mode.
The locator is connected to the application 24 hours a day and is primarily powered by the e-bike battery. If you are not going to use the e-bike for a long time, we recommend switching it on occasionally for at least a few minutes to recharge the battery of the locator. In case the e-bike battery is completely discharged or you remove it from the e-bike, the GPS signal will not be interrupted. The locator's additional battery can last up to three weeks in standby mode. During active operation, it lasts up to 12 hours.
If you don't have time to charge the e-bike regularly, we recommend ordering an additional backup battery with an extension cable, which doubles the standby and active modes.
Buy an additional backup battery>
PowUnity Bike App
The first year, you can enjoy using the app anywhere in Europe for free. After the first year, you have the option to purchase a yearly flat rate for EUR 39 or a monthly flat rate for EUR 3.9 directly in the application. In the case of a monthly flat rate, you can deactivate the application at any time if you will not need it for a long time (e.g. in the winter months), and then reactivate it and renew the monthly flat rate.
Route diary - automatically records every cycle ride without the need to start it manually.
Newsfeed – news and interesting facts about bike theft protection
Personal data protection
For installation of the locator to the Generation 4th it is required to activate the Power Port (12 V) first. This can be done with help of Bosch diagnostic.
The installation depends on the motor of your e-bike. Together with the GPS tracker, we will supply you with the appropriate connection cable and a set of simple, easy-to-understand installation instructions.
Detailed instalation information can be found here: