Basic tuning kit for your e-bike with Brose Specialized motor.
This tuning kit enables you to deactivate the speed limiter of your e-bike. When in use, the actual speed of 22 km/h will appear on your display. Then the speed indicator gets stabilized and keeps on showing the same value even at higher speeds.
How does SpeedBox 1.0 work?
SpeedBox 1.0 for Brose stays active after being installed in your bike, so you don’t have to worry about turning it on and off.
Assembly
Anyone can install the chip to an e-bike with some basic tools! We have prepared detailed instructions and videos to make installation easy for you in the comfort of your home. Disassembly of our tuning chip is just as easy. If you have any troubles with the installation, do not hesitate to contact us.
If you are planning to install SpeedBox on a brand-new bike, make sure you ride it for at least 1 km before the chip is activated.
Please note that the operation of this type of modified electric bikes on public roads may be against the law in some countries. The manufacturer takes no responsibility for damages resulting from the use SpeedBox products. Electric bikes equipped with SpeedBox products are not allowed to be used on public roads, cycling paths and public places. Electric bikes equipped with SpeedBox products can be used exclusively on private property and entirely at one’s own risk. The use of SpeedBox may void the warranty of your ebike.
We strongly recommend using other safety features and protective gear to prevent injuries in higher speeds.
Very bad cable connection, must cut cables, not secure connection
Display shows: not actual values
Compatible with displays: not with ...
More
Very bad cable connection, must cut cables, not secure connection
Display shows: not actual values
Compatible with displays: not with Turbo Connect display, or Specilaized Mission Control
Activation: No
Compatible with SpeedBox App: No
Speed limit setting: No
Cuesta insertar los cables en las conexiones, se doblan y no hay modo de conseguir que entren, finalmente los estañé y con la ganancia de dureza c ...
More
Cuesta insertar los cables en las conexiones, se doblan y no hay modo de conseguir que entren, finalmente los estañé y con la ganancia de dureza conseguí conectarlo, pero nos llevó mucho tiempo de instalación.
Small, lightweight and fits easily into the motor housing.
Small, lightweight and fits easily into the motor housing.
Not so easy to install as the video says. Unfortunately the sensor cable that Brose now uses in its motor has extremely thin and weak wires, so they ...
More
Not so easy to install as the video says. Unfortunately the sensor cable that Brose now uses in its motor has extremely thin and weak wires, so they are very difficult to press into the push-fit connection on the box. I had to cut further back and splice them onto thicker wires in order to fit the box. A non-invasive installation method (like the Speedbox for Shimano Steps uses) would be much better.
Agnis Matisans
Simple instalation and no problems using
Recomend
Simple instalation and no problems using
Recomend
none
none
Was this review helpful? Yes (0) No (0)
Jędrzej Gabryel
Works absolutely fine
Works absolutely fine
Was this review helpful? Yes (0) No (0)
Lazaro Leal
Excelente
Excelente
Was this review helpful? Yes (0) No (0)
Bike Algarve
Realy change 25km/h limit
Not detectable
Realy change 25km/h limit
Not detectable
Very bad cable connection, must cut cables, not secure connection
Display shows: not actual values
Compatible with displays: not with ... More
Very bad cable connection, must cut cables, not secure connection
Display shows: not actual values
Compatible with displays: not with Turbo Connect display, or Specilaized Mission Control
Activation: No
Compatible with SpeedBox App: No
Speed limit setting: No
Was this review helpful? Yes (0) No (0)
Miguel Tur Ramón
Cuesta insertar los cables en las conexiones, se doblan y no hay modo de conseguir que entren, finalmente los estañé y con la ganancia de dureza c ... More
Cuesta insertar los cables en las conexiones, se doblan y no hay modo de conseguir que entren, finalmente los estañé y con la ganancia de dureza conseguí conectarlo, pero nos llevó mucho tiempo de instalación.
Was this review helpful? Yes (0) No (0)
Kurt Declercq
the bike ride's so mutch better now ......
easy installation
the bike ride's so mutch better now ......
easy installation
Was this review helpful? Yes (0) No (0)
Darren Howe
Small, lightweight and fits easily into the motor housing.
Small, lightweight and fits easily into the motor housing.
Not so easy to install as the video says. Unfortunately the sensor cable that Brose now uses in its motor has extremely thin and weak wires, so they ... More
Not so easy to install as the video says. Unfortunately the sensor cable that Brose now uses in its motor has extremely thin and weak wires, so they are very difficult to press into the push-fit connection on the box. I had to cut further back and splice them onto thicker wires in order to fit the box. A non-invasive installation method (like the Speedbox for Shimano Steps uses) would be much better.
Was this review helpful? Yes (0) No (0)
Jerome colloud
Au top
Au top
Was this review helpful? Yes (0) No (0)