서승보
시마노 e5000 2021년 생산제품 호환되나요?
Basic tuning kit for your e-bike with Shimano motor.
SpeedBox 1.0 enables to double the speed limit of an e-bike from the original 25 km/h to 50 km/h. When in use, the actual speed will appear on your display up to 22 km/h. Then the speed indicator gets stabilized and keeps on showing the same value even at higher speeds.
The motor’s electric assistance switches off when reaching 50 km/h.
If you don’t have lights on your bike, SpeedBox 1.0 for Shimano will be constantly activated. If the lights are assembled on your bike, you will be able to turn on the tuning chip whenever needed. SpeedBox 1.0 tuning kit will be activated on your bike’s control panel. If the lights are turned off, you can reach the speed of 50 km/h. The chip can be easily deactivated by turning on the lights.
When connecting the SpeedBox chip to an e-bike you will find connectors colored to make installation very simple. We have prepared detailed instructions and videos to make installation easy for you. Disassembly of our tuning chip is just as easy. If you have any troubles with installation or disassembly, do not hesitate to contact us.
If you are planning to install SpeedBox on a brand-new bike, make sure you ride it for at least 1 km before the chip is activated.
Please note that the operation of this type of modified electric bikes on public roads may be against the law in some countries. The manufacturer takes no responsibility for damages resulting from the use SpeedBox products. Electric bikes equipped with SpeedBox products are not allowed to be used on public roads, cycling paths and public places. Electric bikes equipped with SpeedBox products can be used exclusively on private property and entirely at one’s own risk. The use of SpeedBox may void the warranty of your ebike.
We strongly recommend using other safety features and protective gear to prevent injuries in higher speeds.
시마노 e5000 2021년 생산제품 호환되나요?
Hello when I comnect my sppedbox to my shimano e7000 there is no power going to my bike, what am I doing wrong...
Instructions for E7000 please. I cant find any.
Instructions for E7000 please. I cant find any.
I want the box to always be on, how do I do that even if I have lights installed?
Can it be used so that box turns on when light is on instead of off?
Hello when I comnect my sppedbox to my shimano e7000 there is no power going to my bike, what am I doing wrong
MANUEL SALVA
TODO PERFECTO
TODO PERFECTO
Was this review helpful? Yes (0) No (0)
Lazaro Leal
Presenta un fallo W011
Presenta un fallo W011
Was this review helpful? Yes (0) No (0)
Gašper Hribšek
super deluje
super deluje
Was this review helpful? Yes (0) No (0)
Paul Varin
Awesome quality product
Awesome quality product
Was this review helpful? Yes (0) No (0)
Darren Howe
Great design. Really simple to fit.
Great design. Really simple to fit.
Was this review helpful? Yes (0) No (0)
Gun-Seok Park
good
good
Was this review helpful? Yes (0) No (0)
Miguel Tur Ramón
Muy fácil instalación, perfectamente explicado en el video tutorial. Funciona desde el primer segundo.
Muy fácil instalación, perfectamente explicado en el video tutorial. Funciona desde el primer segundo.
..
..
Was this review helpful? Yes (0) No (0)
Benjamín Buendía
funciona perfecto
funciona perfecto
Was this review helpful? Yes (0) No (0)
Lucia Padyšák
Great stuff
Great stuff
Was this review helpful? Yes (0) No (0)
Jörg Schubert
Sehr Gut !
Sehr Gut !
Was this review helpful? Yes (0) No (0)
Jerome colloud
Au top
Au top
Was this review helpful? Yes (0) No (0)
Edi
1A
1A
Was this review helpful? Yes (0) No (0)
Rico Garbatzki
everything great. very easy installation. works very well.
everything great. very easy installation. works very well.
Was this review helpful? Yes (1) No (0)