PROPERTIES:
Speed limiter: deactivated
Display shows: actual values
Compatible with displays: KIOX, INTUVIA, NYON, PURION and COBI
Activation: by pressing WALK / + - + -
Compatible with SpeedBox App: NO


More >>

Product code: SB2_B_10+1

1 440 € incl. VAT

Specify product selection

In Stock
pcs

Reliable second generation tuning chip for e-bikes with Bosch motors.

SpeedBox 2.0 tuning chip enables you to suppress the speed limiter on your electric bike. After the chip is installed, your e-bike’s display will show real data, such as maximum and average speeds, daily mileage and cruising range.

How does SpeedBox 2.0 work?

The tuning kit can be activated directly from the mobile application or on your bike’s display.  After pressing the WALK button, a value of 9.9 km/h (6.2 mph) is displayed and from now on you will be able to ride at a speed of 40 km/h, 50 km/h and even more than 60 km/h.

To deactivate the tuning kit, press the WALK button again. The value of 2.5 km/h (1.6 mph) will appear on your display and the speed limit will reset to 25 km/h. Your e-bike will then work the same as before installation of the chip.

SpeedBox was also designed for e-bikes that do not have a classic control unit with Walk button. In this case you can just use the combination of + - + -  buttons and SpeedBox will be activated. You can easily deactivate SpeedBox in the same way.

Assembly

When connecting the SpeedBox chip to an e-bike you will find connectors colored to make installation very simple. We have prepared detailed instructions and videos to make installation easy for you. Disassembly of our tuning chip is just as easy. If you have any troubles with installation or disassembly, do not hesitate to contact us.

If you are planning to install SpeedBox on a brand-new bike, make sure you ride it for at least 1 km before the chip is activated.

Download manual

 

Warning

Please note that the operation of this type of modified electric bikes on public roads may be against the law in some countries. The manufacturer takes no responsibility for damages resulting from the use SpeedBox products. Electric bikes equipped with SpeedBox products are not allowed to be used on public roads, cycling paths and public places. Electric bikes equipped with SpeedBox products can be used exclusively on private property and entirely at one’s own risk. The use of SpeedBox may void the warranty of your ebike.

We strongly recommend using other safety features and protective gear to prevent injuries in higher speeds.

Facile à monter
Vitesse réel au tableau de bord
Peut être commandé avec la commande d'origine en roulant

Lenteur de livraison du produit

Was this review helpful? Yes (0) No (0)

Veloce da installare e molto semplice da attivare

Al momento nessuna critica

Was this review helpful? Yes (0) No (0)

Prompt shipping and easy tracking to the US via Czech Post. Easy installation following video (pay attention to speed sensor vs taillight plug!). ... More

none so far.

Was this review helpful? Yes (1) No (0)

WOW!!! Amazing! I absolutely love it! It works as promised!

Was this review helpful? Yes (0) No (0)

Un autre produit Tchèque parfait (l'autre c'est l'imprimante Prusa 3D !). Impossible de se tromper entre les différents connecteurs car ceux fournis s ... More

Aucun.

Was this review helpful? Yes (0) No (0)

It works exactly as described. Can hide it between the motor unit and the plastic shell instead of unscrewing the motor from the frame as described in ... More

Likely because of COBI.bike changing the button function on the thumb controller (while fiddling around with it): caused weird glitch with power mode, ... More

Was this review helpful? Yes (0) No (0)

easy install and best performance

shipping takes more than one week.

Was this review helpful? Yes (0) No (0)

good product, easy to install, very efficient
makes the bike more attractive
to be recommended to everyone

could surely be cheapest
to be discounted when purchase several units

Was this review helpful? Yes (0) No (0)

Next
Comments

Aidan

Hi, Could you advise how I configure a Sppedbox 2 via a pc to work with the COBI bike system.

Thanks Aidan

Jiří Voldán (Sales Manager)Administrator |

You don't have to do this at all. It's simply compatible as it is.

Bruno Nunes

Just a question is this one also compatible with COBI.Bike?

Thank you very much.
Bruno

Ivan

Q1: Does speedbox 2 need additional waterproofing? It looks pretty open and on my bike sits in a place vulnerable to rain.

Q2: Does bosch cx motor have any built in thermal failssfes? Or i should put a thermometer on it just in case?

Q3: how exaclty is platinum version better?

Nicolag

Hello did it play with performance cx with emtb mode ?

Veronika Pinkasová (Sales Manager)Administrator |

Hello,
yes, the SpeedBox works with the motor Bosch Performance CX in EMTB mode, it works in all modes, except the OFF mode of course.
Kind regards.

Titola

Hello
Is this speedbox2 play with the performance cx with emtb mode
Thx

Veronika Pinkasová (Sales Manager)Administrator |

Hello,
yes, the SpeedBox works with the motor Bosch Performance CX  in all modes, except the OFF mode of course.
Kind regards.
Next
Contact us!