PROPERTIES:
Speed limiter: deactivated
Display shows: actual values
Compatible with displays: KIOX, INTUVIA, NYON, PURION and COBI
Activation: by pressing WALK / + - + -
Compatible with SpeedBox App: NO


More >>

Product code: SB2_B_20+3pcs_BOX

2 880 € incl. VAT

Specify product selection

In Stock
pcs

Reliable second generation tuning chip for e-bikes with Bosch motors.

SpeedBox 2.0 tuning chip enables you to suppress the speed limiter on your electric bike. After the chip is installed, your e-bike’s display will show real data, such as maximum and average speeds, daily mileage and cruising range.

How does SpeedBox 2.0 work?

The tuning kit can be activated directly from the mobile application or on your bike’s display.  After pressing the WALK button, a value of 9.9 km/h (6.2 mph) is displayed and from now on you will be able to ride at a speed of 40 km/h, 50 km/h and even more than 60 km/h.

To deactivate the tuning kit, press the WALK button again. The value of 2.5 km/h (1.6 mph) will appear on your display and the speed limit will reset to 25 km/h. Your e-bike will then work the same as before installation of the chip.

SpeedBox was also designed for e-bikes that do not have a classic control unit with Walk button. In this case you can just use the combination of + - + -  buttons and SpeedBox will be activated. You can easily deactivate SpeedBox in the same way.

Assembly

When connecting the SpeedBox chip to an e-bike you will find connectors colored to make installation very simple. We have prepared detailed instructions and videos to make installation easy for you. Disassembly of our tuning chip is just as easy. If you have any troubles with installation or disassembly, do not hesitate to contact us.

If you are planning to install SpeedBox on a brand-new bike, make sure you ride it for at least 1 km before the chip is activated.

Download manual

 

Warning

Please note that the operation of this type of modified electric bikes on public roads may be against the law in some countries. The manufacturer takes no responsibility for damages resulting from the use SpeedBox products. Electric bikes equipped with SpeedBox products are not allowed to be used on public roads, cycling paths and public places. Electric bikes equipped with SpeedBox products can be used exclusively on private property and entirely at one’s own risk. The use of SpeedBox may void the warranty of your ebike.

We strongly recommend using other safety features and protective gear to prevent injuries in higher speeds.

Facile à monter
Vitesse réel au tableau de bord
Peut être commandé avec la commande d'origine en roulant

Lenteur de livraison du produit

Was this review helpful? Yes (0) No (0)

Veloce da installare e molto semplice da attivare

Al momento nessuna critica

Was this review helpful? Yes (0) No (0)

Prompt shipping and easy tracking to the US via Czech Post. Easy installation following video (pay attention to speed sensor vs taillight plug!). ... More

none so far.

Was this review helpful? Yes (1) No (0)

WOW!!! Amazing! I absolutely love it! It works as promised!

Was this review helpful? Yes (0) No (0)

Un autre produit Tchèque parfait (l'autre c'est l'imprimante Prusa 3D !). Impossible de se tromper entre les différents connecteurs car ceux fournis s ... More

Aucun.

Was this review helpful? Yes (0) No (0)

It works exactly as described. Can hide it between the motor unit and the plastic shell instead of unscrewing the motor from the frame as described in ... More

Likely because of COBI.bike changing the button function on the thumb controller (while fiddling around with it): caused weird glitch with power mode, ... More

Was this review helpful? Yes (0) No (0)

easy install and best performance

shipping takes more than one week.

Was this review helpful? Yes (0) No (0)

good product, easy to install, very efficient
makes the bike more attractive
to be recommended to everyone

could surely be cheapest
to be discounted when purchase several units

Was this review helpful? Yes (0) No (0)

Next
Comments

Marc

Hello, can you answer if the speedbox works with the engine "Performance Line CX gen 4 (2020)"

Jiří Voldán (Sales Manager)Administrator |

Yes, SpeedBox is fully compatible.

Gordon Mackerrall

Installed Speedbox 2 on my Cube Steroe Hybrid - Kiox . Fitted with 2019 Bosch CX performance motor . Trying to activate using the Walk button , the Kiox display does not show the 9.9 speed figure you state . It shows kind of count down clock , do I hold the walk button down until the clock counts down to activate ? Try a few different times but Speedbox 2 does not activate ?
What do I need to do ?

Jiří Voldán (Sales Manager)Administrator |

Hi Gordon. Turn off lights (even if you don't have any) and press WALK then. That should help.

Sandy Macdonald

I have a bosch active line if I bought this product would I be able to increase my top speed. Ps stay in great Britain

Jiří Voldán (Sales Manager)Administrator |

Hi Sandy. Yes this is exactly what SpeedBox does. We ship worldwide though.

Jack

Hi
What is the difference between the speed of 2.0 and the Platinium?
Thanks

Kostas Platakos

Does the SpeedBox 2.0 works with the new Bosch Performance Line CX GEN.4 motor? Any installation demo video?
Is it Compatible with KIOX display from e.g. Cube Hybrid Reaction 2020?

Jiří Voldán (Sales Manager)Administrator |

Hi, yes SpeedBox 2.0 is fully compatible with your bike and display. Video will be done in a month.

Next
Contact us!