PROPERTIES:
Speed limiter: deactivated
Display shows: actual values
Compatible with motors: PW-SE, PW-X a PW-TE
Activation: by pressing WALK / LIGHT /↑ ↓ ↑ ↓
Compatible with SpeedBox App: NO

More >>

Product code: SB2_Y_20+3

3 580 € incl. VAT

Specify product selection

In Stock
pcs

Reliable second generation tuning chip for your e-bike with Yamaha motor.

SpeedBox 2.0 chip enables to suppress the speed limiter on your electric bike. After the chip is installed your e-bike’s display shows real data, such as maximum and average speed, daily mileage and cruising range.

How does SpeedBox 2.0 work?

SpeedBox 2.0 chip is activated on your e-bike’s display by pressing the WALK or LIGHT button. Displays of e-bikes produced between 2017-2018 show the speed of 9.9 km/h (6.1 mph) after pressing the button. From now on you can ride at a speed of - 40 km/h, 50 km/h or even more than 60 km/h.

Displays of e-bikes produced in 2019 show a speed of 9 km/h (6 mph). From now on you can ride at a speed - 40 km/h, 50 km/h or even more than 60 km/h.

To deactivate the tuning kit, press the WALK or LIGHT button again. The speed limit of 25 km/h is reset. Your e-bike will then work the same as before chip installation.

If you want to control your SpeedBox and lights separately, use the combination of ↑↓↑↓ buttons. By pressing the arrows in that order you can activate and disactivate SpeedBox anytime independently of the lights control.

SpeedBox was also designed for e-bikes that do not have a classic control unit with Walk button. In this case you can just use the combination of arrows ↑ ↓ ↑ ↓ and SpeedBox will be activated. You can easily deactivate SpeedBox in the same way.

Assembly

When connecting the SpeedBox chip to an e-bike you will find connectors colored to make installation very simple. We have prepared detailed instructions and videos to make installation easy for you. Disassembly of our tuning chip is just as easy. If you have any troubles with installation or disassembly, do not hesitate to contact us.

If you are planning to install SpeedBox on a brand-new bike, make sure you ride it for at least 1 km before the chip is activated.

Download manual



Warning

Please note that the operation of this type of modified electric bikes on public roads may be against the law in some countries. The manufacturer takes no responsibility for damages resulting from the use SpeedBox products. Electric bikes equipped with SpeedBox products are not allowed to be used on public roads, cycling paths and public places. Electric bikes equipped with SpeedBox products can be used exclusively on private property and entirely at one’s own risk. The use of SpeedBox may void the warranty of your ebike.

We strongly recommend using other safety features and protective gear to prevent injuries in higher speeds.



Schnelle Lieferung, Top Leistung - Super Service!
Klare Kaufempfehlung!

Was this review helpful? Yes (0) No (0)

Que demander de plus ? rien, le boitier est parfait.
Impossible de se tromper lors du montage.
Site très bien fait pour ne pas se ... More

Was this review helpful? Yes (0) No (0)

Comments

Jack Elliott

If my bike has inbuilt lights is there another way of turning on/off? Thanks

Tony

I want to get one of these for a Haibike SDURO Trekking 6.0. Can someone please clarify what the issue is regarding lights and whether this has been rectified?

Jiří Voldán (Sales Manager)Administrator |

Issue with lights? There is none. This SpeedBox works perfectly and separately from lights.

Shaun Edwards

i have found that it will not work in mph but have found to make it work with my pw-x 2019 i have to put the side switch into km first to activate it then put it in mph but if i switch off bike i have to do it again. also cant switch light off up down up down not working in km/mph

Roar

I was going to by speedbox 2 for a Haibike Sduro Trekking 6.0 but not so sure now. As I understand it, pressing the light button you drive unrestricted with lights on. If you press up-down up-down you switch the light of. Do you have to do the same to switch it of again, or ?

Seb

Hi, after the installation of speedbox2 on my haibike hardseven 7.0 2019 i will go for 1or 2 km but my display do not indicat the speed when i run And the other information ( trip, odo,...) flash always. The bike have 40 km.

Jiří Voldán (Sales Manager)Administrator |

Hi Seb, does your SpeedBox work or not?

Next
Contact us!