Speed limiter: deactivated
Display shows: actual values
Compatible with motors: PW-SE, PW-X, PW-TE, PW-CE, PWX2 and PW-ST
Not compatible with following bikes: CrossCore, CrossConnect, YDX-Torc, YDX-Moro, YDX-Moro Pro, UrbanRush and Wabash
Activation: by pressing WALK / LIGHT /↑ ↓ ↑ ↓
Compatible with SpeedBox App: NO More
Product code: SB2_Y_100+16pcs_BAGShipping and Payment
Reliable second generation tuning chip for your e-bike with Yamaha motor.
SpeedBox 2.0 chip enables to suppress the speed limiter on your electric bike. After the chip is installed your e-bike’s display shows real data, such as maximum and average speed, daily mileage and cruising range.
How does SpeedBox 2.0 work?
SpeedBox 2.0 chip is activated on your e-bike’s display by pressing the WALK or LIGHT button. Displays of e-bikes produced between 2017-2018 show the speed of 9.9 km/h (6.1 mph) after pressing the button. From now on you can ride at a speed of - 40 km/h, 50 km/h or even more than 60 km/h.
Displays of e-bikes produced in 2019 show a speed of 9 km/h (6 mph). From now on you can ride at a speed - 40 km/h, 50 km/h or even more than 60 km/h. To deactivate the tuning kit, press the WALK or LIGHT button again. The speed limit of 25 km/h is reset. Your e-bike will then work the same as before chip installation.
If you want to control your SpeedBox and lights separately, use the combination of ↑↓↑↓ buttons. By pressing the arrows in that order you can activate and disactivate SpeedBox anytime independently of the lights control.
SpeedBox was also designed for e-bikes that do not have a classic control unit with Walk button. In this case you can just use the combination of arrows ↑ ↓ ↑ ↓ and SpeedBox will be activated. You can easily deactivate SpeedBox in the same way.
When connecting the SpeedBox chip to an e-bike you will find connectors colored to make installation very simple. We have prepared detailed instructions and videos to make installation easy for you. Disassembly of our tuning chip is just as easy. If you have any troubles with installation or disassembly, do not hesitate to contact us.
If you are planning to install SpeedBox on a brand-new bike, make sure you ride it for at least 1 km before the chip is activated.
Please note that the operation of this type of modified electric bikes on public roads may be against the law in some countries. The manufacturer takes no responsibility for damages resulting from the use SpeedBox products. Electric bikes equipped with SpeedBox products are not allowed to be used on public roads, cycling paths and public places. Electric bikes equipped with SpeedBox products can be used exclusively on private property and entirely at one’s own risk. The use of SpeedBox may void the warranty of your ebike.
We strongly recommend using other safety features and protective gear to prevent injuries.
PositivesNotre client est très content de ce produit.
PositivesSimple d'installation montage sur connecteur d'origine sans soudure
NegativesManque une petite housse en mousse pour éviter les vibrations dans le cadre
Negativesblijkbaar verkeerde chip besteld,zal teruggestuurd worden.
PositivesQue demander de plus ? rien, le boitier est parfait.
Impossible de se tromper lors du montage.
Site très bien fait pour ne pas se ...More