Display shows: half the actual values
Maximum speed: 50 km/h
Activated by: SpeedBox always active
Activated by: lights (installed by technician) = ability to turn the SpeedBox on/off More >>

Product code: SB1S_E6

139 € incl. VAT

In Stock

SpeedBox for Shimano Steps E6000 is a process control module which increases the maximum speed of your electric bike from 25 km/h to 50 km/h.

If you do not have lights installed by a certified service technician, the tuning kit is always active from the moment you turn on your bike.

If you have lights on your ebike, which have been installed by a certified service technician, then you will be able to activate or deactivate your SpeedBox.

Lights ON → SpeedBox is deactivated
Lights OFF → SpeedBox is activated

If you prefer to have your lights ON and SpeedBox active at the same time, then do not connect the “Light Con” cable.

Please note that the operation of modified electric bikes on public roads may be against the law in some countries. The manufacturer takes no responsibility for damages resulting from the use of SpeedBox1 or SpeedBox2 products. Electric bikes equipped with the SpeedBox1 or SpeedBox2 products are not allowed on public roads, bike paths and in public places. Electric bikes equipped with SpeedBox1 or SpeedBox2 products can be used exclusively on private property and entirely at one's own risk. The use of SpeedBox1 and/or SpeedBox2 may void the warranty of your ebike.

22. 07. 2018, 11:41



Was this review helpful? Yes (0) No (1)

20. 12. 2018, 21:49

Totally useless waist of money I got scammed it does not do a bloidy thing motor still cuts out at 25km crap crap crap

Was this review helpful? Yes (0) No (1)

By sending this, you provide us your consent to the processing of your personal data.

Gabe 18. 02. 2019, 09:59

Hi there will this work with a bike with a Di2 electric shifter? I assume the auto shift would get confused but might work ok in manual shift mode?

Any plans to do a unit that will allow correct speed to be shown like the e8000 version?

Jiří Voldán (Sales Manager) Administrator 18. 02. 2019 | 09:59

Hi Gabe, e8000 and e6000 both display half of actual speed. Please tell me what kind of bike you have. Also tell me whether you have E6000 or E6002 mid drive.

Gabriel Aursulesei 14. 02. 2019, 18:59

If fitted the speed box is it bonne show any error?

Adam 20. 12. 2018, 21:29

Purchased a speed box1 for my shimano e steps 6000 totally waist of money does not do a bloody thing motor still cuts out at 25kmh nothing different pissed right of looks like I got scammed .Then trying to contact any one impossible unless you speak and understand German and are able to dial international numbers

Jiří Voldán (Sales Manager) Administrator 20. 12. 2018 | 21:29

Hi Adam, I was communicating with you on the online chat. Don't know why you went off. I'll help you with this one. Our biggest resellers are Germans, you probably bought SpeedBox from them. However, we're the manufacturer so.. I must make sure you understand how to verify functionality of SpeedBox. You wasn't scammed. We succesfully tuned more than 50000 eBikes already. SpeedBox for Shimano E6000 is not really a problematic. You said that 'Light Con.' cable is disconnected, right? OK. So turn the bike on. When 'Light Con.' cable is disconnected then SpeedBox is always active. So once the bike is ON then you should press no button to activate the SpeedBox. It's active from the start. How to verify that SpeedBox works? Easilly. Take a ride. There will be exact half of actual speed on the display. So when you ride 40 kph you should see 20 kph on the display. Please test it out. Let me know if problem remains. We will definitely solve this problem. Don't worry.

Design of products

Design of products

Although appearance is not very important for SpeedBox, we want it to excel among others and be among the designer pieces. Components made of high-quality material gives SpeedBox not only mechanical strength, durability and water resistance, but also an attractive appearance.

Top quality

Top quality

We use only electronic components of world's leading producers, during the production of SpeedBox. The processor is certified for the automotive industry, and the SpeedBox is tested several times during and after production to make sure you receive a reliable product.

Easy installation

Easy installation

We use the original keyed connectors to connect the SpeedBox to the electric bike, which are colour coded so you know exactly where to connect the connector. We've put together detailed instructions and videos which could help you easily install the SpeedBox by yourself.