SpeedBox 3.0 for Bosch - Package: BOX, Qty: 10 pcs + 1 free

star 1 star 2 star 3 star 4 star 5(331)Rating value is 5 of 5
Specify product selection
Variant does not exist

1 890 €
In Stock
pcs

PROPERTIES:
Display shows: actual values
Maximum speed: unlimited
Speed limit setting: YES
Activation: WALK function/ - + - +
Compatible with displays:
   KIOX
   INTUVIA
   NYON
   PURION
   COBI
Compatible with motors:
   Active Line Plus
   Performance Line
   Performance Line CX Line
   Performance Line Speed
   Cargo Line
Not compatible with:
   Bosch Smart System
   SpeedBox App
More

Product code: SB3_B_10+1pcs_BOX Shipping and Payment

A smart tuning of the third generation with an option to set a speed limit of an e-bike

SpeedBox 3.0 tuning kit enables to select speed limit of your own choice. After the SpeedBox is installed, your e-bike’s display will show real data, such as maximum and average speeds, daily mileage and cruising range.

How does SpeedBox 3.0 work?

The tuning kit can be activated directly on your bike’s display. You will activate SpeedBox 3.0 by activating the WALK assist function shortly, a value of 9.9 km/h (6.2 mph) is displayed and from now on you will be able to ride at a speed of 40 km/h, 50 km/h and even more than 60 km/h.

To deactivate the tuning, activate the WALK assist function shortly again. The value of 2.5 km/h (1.6 mph) will appear on your display and the speed limit will reset to 25 km/h. Your e-bike will then work the same as before installation of the tuning.

SpeedBox was also designed for e-bikes that do not have a classic control unit with WALK assist function. In this case you can just use the combination of - + - +  buttons and SpeedBox will be activated. You can easily deactivate SpeedBox in the same way.

You can set the maximum speed of an electric assistance by changing modes: Turbo - EMTB - Tour - Eco - Tour - EMTB - Turbo. An actual speed limit will be displayed after that. The maximum speed of an electric assistance can be switched by activating WALK assist function shortly or by turning the rear wheel 360°. The value of 1.5 km/h on the display corresponds with the limit of 15 km/h, 2 km/h corresponds with the limit of 20 km/h, 2.5 corresponds with 25 km/h, 3.0 corresponds with 30 km/h, 9.9 corresponds with 99 km/h etc. The last displayed limit will be saved after 5 seconds of inactivity.

When using SpeedBox 3.0 with Bosch motors of the 4th generation (produced in 2020 or later) it is necessary to leave the bike on after finishing the ride until a value of 0.0 km/h is displayed. During this process the remaining time will be displayed in minutes. Then it is safe to turn off your bike and you can start looking forward to your next trip.

Assembly

When connecting the SpeedBox to an e-bike you will find connectors colored to make installation very simple. We have prepared detailed instructions and videos to make installation easy for you. Disassembly of our tuning chip is just as easy. If you have any troubles with installation or disassembly, do not hesitate to contact us.

If you are planning to install SpeedBox on a brand-new bike, make sure you ride it for at least 10 km before the tuning is activated.

Detailed installation information can be found here.

Warning

Please note that the operation of this type of modified electric bikes on public roads may be against the law in some countries. The manufacturer takes no responsibility for damages resulting from the use SpeedBox products. Electric bikes equipped with SpeedBox products are not allowed to be used on public roads, cycling paths and public places. Electric bikes equipped with SpeedBox products can be used exclusively on private property and entirely at one’s own risk. The use of SpeedBox may void the warranty of your ebike.

We strongly recommend using other safety features and protective gear to prevent injuries.

We recommend not updating the firmware of your e-bike. Updating increases the risk of tuning detection.

Please note that warranty of SpeedBox products does not apply on malfunctions caused by updating the motor.

When stopping for a short time, in order to continue riding smoothly, we recommend keeping one foot on the pedal so that the countdown does not start.

When stopping for a longer period of time, allow at least a partial countdown to take place.

After a long ride, the countdown may take several minutes.

Do not remove the display if the countdown has not been finished.

Bosch Motor Non Smart
Bluetooth/ SpeedBox App NO