SpeedBox 1.3 for Shimano (EP8) - Variant: Standard, Package: BOX, Qty: 1 pcs
The "+ E-Tube port" variant is intended for e-bikes without a free E-Tube port - usually e-bikes with one of these components:
  Satellite System ON/ OFF Switch
  Di2 (electronic gear shifting system)
PROPERTIES:
Maximum speed: unlimited
Activation/deactivation: by turning off/ on the lights
Display shows: real values up to 23 km/h
Compatible with:
  motors EP8
  motors EP8 RS
  Giant Revolt (up to 35 km/h)
Not compatible with:
  Shimano EP801
  SpeedBox App
More
Product code: SB13_S_1pcs_BOX Shipping and Payment
From the ground up redesigned tuning chip for your e-bike with a Shimano motor – with a new design and completely new hardware and firmware.
The tuning chip SpeedBox 1.3 enables you to suppress the speed limiter on your electric bike. When in use, the actual speed will appear on your display up to 23 km/h.
If you want to see correct speed and all riding data during your ride, we recommend choosing SpeedBox 1.3 B.Tuning for Shimano - you can see the real values in our SpeedBox App – right on the display of your phone.
Compared to previous versions, this new product also plugs into the engine's E-Tube port. It is therefore necessary that the e-bike motor in which you are going to install the new version of SpeedBox for Shimano has one free E-Tube port. In case you do not have a free E-Tube port in the motor, please select “+E-Tube Port” variant,
E-bikes, which do not have a free E-Tube port, are usually those with a Di2 electronic gear shifting system, or with a tube integrated Satellite System ON/OFF Switch (EW-SW100, EW-SW300).
How does SpeedBox 1.3 work?
This tuning chip can also be easily controlled with a LIGHT button. If the lights are turned off, SpeedBox is activated. If you want to have the tuning always activated, regardless of the lights status, connect the fork terminal from SpeedBox to the screw terminal marked "-". If you do not have lights function activated on your e-bike, SpeedBox will be activated at all times.
Assembly
We use original connectors for the production of SpeedBox chips ensuring that the installation process is very simple and the chip is connected properly. We have also prepared detailed instructions and videos to make installation easy for you. Disassembly of the tuning chip is just as easy. If you have any troubles with installation or disassembly, do not hesitate to contact us.
If you are planning to install SpeedBox on a brand-new bike, make sure you ride it for at least 10 km before the chip is activated.
Detailed installation information can be found here.
Warning
Please note that the operation of this type of modified electric bikes on public roads may be against the law in some countries. The manufacturer takes no responsibility for damages resulting from the use SpeedBox products. Electric bikes equipped with SpeedBox products are not allowed to be used on public roads, cycling paths and public places. Electric bikes equipped with SpeedBox products can be used exclusively on private property and entirely at one’s own risk. The use of SpeedBox may void the warranty of your ebike.
We strongly recommend using other safety features and protective gear to prevent injuries.
Bluetooth/ SpeedBox App | NO |
---|---|
If you have all E-Tube ports occupied in the motor, choose the option "+E-Tube port" | OK |
Gyula Czibere
PositivesQuick delivery, easy installation, works really good.
Negatives
Julien CORBELLON
Positivesfacilité de montage et qualité de fonctionnement
Negativespas de vitesse réelle
H&K Motorsport GbR Stephan Horneber / Thomas Koch
PositivesEinfach nur Top. Einfache Montegae . Perfekte Performance .
Negatives
Fabian
PositivesEasy to install, efficiency is perfect and the motor is working smooth.
NegativesNo