Speed limiter: up to 50 km/h
Display shows: actual values (only in km/h)
Compatible with motors: Yamaha PW
BE CAREFUL! This chip is not compatible with the following motors: PW-SE, PW-X, PW-TE, PWX2 a PW-ST
Activation: by pressing LIGHT /↑ ↓ ↑ ↓
Compatible with SpeedBox App: NO
Product code: SB2_Y_PW_10+1pcs_BAGShipping and Payment
Reliable second generation tuning chip for your e-bike with Yamaha motor.
SpeedBox 2.0 tuning chip enables to suppress the speed limiter on your electric bike. After the chip is installed your e-bike’s display shows real data, such as maximum and average speed, daily mileage and cruising range.
E-bike electric assistance switches off with this chip when reaching the speed of 50 km/h.
How does SpeedBox 2.0 work?
You can activate the SpeedBox 2.0 tuning kit on your e-bike’s display. After pressing the LIGHT button, a speed of 5.0 km/h (3.1 mph) will appear on the display. After activation you will be able to ride at the speed of 50 km/h.
To deactivate the chip, press the LIGHT button again. The speed of 2.5 km/h (1.5 mph) will appear on your display and the speed limit will reset to 25 km/h. Your e-bike will then work the same as before chip installation.
If you want to control your SpeedBox and lights separately, use the combination of ↑↓↑↓ buttons. By pressing the arrows in that order you can activate and disactivate SpeedBox anytime independently of the lights control.
SpeedBox was also designed for e-bikes that do not have a classic control unit with Walk button. In this case you can just use the combination of arrows ↑ ↓ ↑ ↓ and SpeedBox will be activated. You can easily deactivate SpeedBox in the same way.
When connecting the SpeedBox chip to an e-bike you will find connectors colored to make installation very simple. We have prepared detailed instructions and videos to make installation easy for you. Disassembly of our tuning chip is just as easy. If you have any troubles with installation or disassembly, do not hesitate to contact us.
If you are planning to install SpeedBox on a brand-new bike, make sure you ride it for at least 1 km before the chip is activated.
Please note that the operation of this type of modified electric bikes on public roads may be against the law in some countries. The manufacturer takes no responsibility for damages resulting from the use SpeedBox products. Electric bikes equipped with SpeedBox products are not allowed to be used on public roads, cycling paths and public places. Electric bikes equipped with SpeedBox products can be used exclusively on private property and entirely at one’s own risk. The use of SpeedBox may void the warranty of your ebike.
We strongly recommend using other safety features and protective gear to prevent injuries.
PositivesTHE BEST - like always :)
PositivesClient heureux d'avoir acheté cette SpeedBox
NegativesNe fonctionne pas sur moteur Yamaha PW ST après plusieurs essais en atelier, en attente d'étude pour équipement deux vélos clients avec moteur PW ST. ...More
Positivesbien mais voir point negatif...
PositivesFunktioniert wie immer tadelos