SpeedBox 3.0 for OLI - Package: BOX, Qty: 20 pcs + 3 free
Activation: by entering the WALK assist mode briefly | ↓ ↑↓ ↑
Maximum speed: unlimited
Display shows: actual values
Speed limit setting: YES
motors OLI Sport
Not compatible with: motors OLI Edge
In case of updating the software of your e-bike, uninstall SpeedBox from the e-bike first, update the software and reinstall SpeedBox.
Product code: SB3_OLI_20+3pcs_BOXShipping and Payment
Smart third generation tuning chip for e-bikes with Oli motors.SpeedBox 3.0 tuning chip enables to select speed limit of your own choice. After the chip is installed, your e-bike’s display will show real data, such as maximum and average speeds, daily mileage and cruising range.
How does SpeedBox 3.0 work?
The tuning kit can be activated directly on your bike’s display. To activate tuning, briefly enter the WALK assist mode. The value of 9,9 km/h (6,2 mph) will shortly appear on the display, and from now on you will be able to ride at unlimited speed. To deactivate tuning, briefly enter the WALK assist mode again. The value of 2,5 km/h (1,6 mph) is displayed and the speed limit will be reset to the original 25 km/h.Your e-bike will then work the same as before installation of the chip.
Another way to activate tuning is by pressing the ↓↑ ↓ ↑ buttons. You can easily deactivate SpeedBox in the same way.
You can set the maximum speed limit by switching between the assistance modes - three levels down and then three levels up(for example 4->3->2->1->2->3->4). An actual speed limit will be displayed after that. The value of 1,5 km/h on the display corresponds with the limit of 15 km/h, 2,0 km/h corresponds with the limit of 20 km/h, 2,5 corresponds with 25 km/h, 3,0 corresponds with 30 km/h etc. The maximum speed of an electric assistance can be set by entering the WALK assist mode repeatedly, or by turning the rear wheel 360°.The last displayed limit will be saved after 5 seconds of inactivity.
When connecting the SpeedBox chip to an e-bike you will find connectors colored to make installation very simple. We have prepared detailed instructions and videos to make installation easy for you. Disassembly of our tuning chip is just as easy. If you have any troubles with installation or disassembly, do not hesitate to contact us.
If you are planning to install SpeedBox on a brand-new bike, make sure you ride it for at least 1 km before the chip is activated.
Please note that the operation of this type of modified electric bikes on public roads may be against the law in some countries. The manufacturer takes no responsibility for damages resulting from the use SpeedBox products. Electric bikes equipped with SpeedBox products are not allowed to be used on public roads, cycling paths and public places. Electric bikes equipped with SpeedBox products can be used exclusively on private property and entirely at one’s own risk. The use of SpeedBox may void the warranty of your ebike.
We strongly recommend using other safety features and protective gear to prevent injuries.
|Qty||100 pcs + 16 free|